Back to All Tools

Online Cut List Optimizer for Plywood, MDF & Cabinets

Turn a cabinet parts list into a plan your shop can review.

Plan rectangular panels using your stock sizes and material costs. Compare sheet layouts, account for grain and edge banding, and move from a saved cut list to workshop exports or a customer-linked quote.

mm + in
Display units
PDF + DXF
Layout exports
Parts + boxes
Panel inputs

What is an online cut list optimizer?

A cut list optimizer turns part dimensions and quantities into a layout on available sheet stock. CNC Cut to Size focuses on rectangular cabinet and millwork panels: compare sheet use and material cost, review grain direction and edge banding, then save or export the plan.

Best fit
Cabinetmakers & millwork shops
Units
Inches or millimeters
Layout spacing
Fixed 5/8 inch (15.875 mm)
Access
Subscription or approved trial

From cabinet dimensions to organized cutting layouts

One browser-based workflow for panel planning, saved cut lists and the next step in your shop.

Rectangular panel nesting

Arrange rectangular cut parts on stock sheets and compare material waste or sheet cost using the existing optimization modes.

Boxes, drawers and individual parts

Build a panel list from box dimensions or enter individual components for cabinet carcasses, drawers and repeat woodworking projects.

Grain and edge banding

Carry grain direction requirements into panel planning and review edge banding quantities alongside the layout.

PDF and DXF layout exports

Download visual PDF workshop plans, rectangular DXF layouts, CSV placement data or spreadsheet-compatible XLS reports.

Multiple stock sheet definitions

Enter available sheet dimensions, thicknesses, quantities and costs before comparing a min-waste or min-cost layout.

Saved projects and quote handoff

Save and reopen optimizer drafts. In the customer-linked quoting workspace, turn the result into a quote without retyping the cut list.

Practical tools for rectangular sheet goods

Review the details that affect your job: stock sizes, part orientation, material cost and a usable handoff.

See the layout

Inspect individual part placements and sheet-by-sheet utilization before exporting.

Start from your job

Use individual rectangular parts or box-panel inputs, including backers where configured.

Inches or millimeters

Switch display units. Current layouts use fixed 5/8-inch (15.875 mm) spacing, not an adjustable saw kerf.

Job-specific results

Review sheets used, material cost, waste and unplaced parts. Results depend on the input and constraints, not a promised savings percentage.

Plan your sheet goods

Work with MDF, plywood, melamine and other rectangular sheet stock using the dimensions and costs you enter.

A practical handoff

Share a PDF plan or pass a DXF layout to your CAD/CAM workflow for machine-specific preparation.

From cut list to workshop plan

A clearer plan for every sheet

For cabinetmakers, CNC routing shops and commercial millwork teams across the United States and Canada. Plan rectangular MDF, plywood and melamine panels with the stock dimensions and material prices your shop actually uses.

  1. 1

    Define stock and parts

    Enter sheet sizes, available quantities and costs. Add parts or box dimensions, or review imported CSV/XML data.

  2. 2

    Optimize and inspect

    Choose minimum waste or minimum cost. Review placements, grain requirements, unplaced parts and sheet-by-sheet utilization.

  3. 3

    Save, export and quote

    Keep a draft for repeat work, export a workshop report, or create a quote from a customer-linked workspace.

Cabinet sideCabinet sideShelfShelfBacker
Illustrative panel layout, not a live optimization result. Actual placement, spacing and yield depend on your input.

Panel planning, with clear production boundaries

Cut lists in

Manual rectangular parts and box panels; CSV/XML cut-list imports. Supported document extraction needs a dimension check before use.

Layouts out

PDF workshop reports, CSV placement data, spreadsheet-compatible XLS reports and rectangular DXF layout geometry.

Shop review required

Fixed 15.875 mm (5/8-inch) spacing. No arbitrary-shape contour nesting, STEP unfolding or validated machine NC output. Prepare DXF layouts in your own CAD/CAM system.

Built around real shop inputs

One panel-planning workflow. Different sheet goods.

For woodworking businesses across the United States and Canada, a useful cutting plan starts with the stock in the shop and the parts on the job, not an assumed material-saving percentage.

Cabinet sides, shelves & furniture panels

Plywood cut list planning

Enter the actual sheet dimensions and thickness, not just a nominal 4 × 8-foot size. Match visible face-grain direction between components and review any rotations before cutting.

Paint-grade panels & millwork components

MDF sheet optimization

Build a rectangular parts list for partitions, shelves and cabinet components. Compare available stock sizes and costs. A sheet layout does not replace machining details for profiles, pockets or joinery.

Closet systems & cabinet interiors

Melamine panel layouts

Record required edge banding and any directional surface pattern. Check whether entered dimensions describe the panel blank or the finished component, and review edge treatments before production.

From a parts list to a customer estimate. Save the layout for repeat jobs; in a customer-linked workspace, carry the result into a quote. For broader project pricing, explore our project estimating workflow. For outsourced production, see trade cabinet-parts fabrication.

Worked example · area calculation, not a nesting result

How many plywood sheets do I need?

Start with the total part area, then check whether the shapes actually fit with spacing and grain constraints. Area alone is a lower bound, not a reliable sheet count.

Example inputs: four rectangular shelves
ItemSize (inches)Qty
Stock sheet48 × 961
Shelf24 × 164
Sheet area
32 square feet
Combined shelf area
10.67 square feet
Part area ÷ sheet area
33.3% before layout allowances

This calculation does not prove a cutting arrangement or reusable offcut size. The optimizer must place the parts with its fixed 5/8-inch spacing; review grain, unplaced parts and your shop's trimming requirements separately.

Minimum waste and minimum cost are different goals

A tightly packed sheet is not always the least expensive purchase. Enter actual sheet prices, compare both optimization modes, and inspect the resulting sheet counts and material costs. Do not assume the lowest waste percentage is the lowest total job cost.

Choose for the job, not the biggest claim

Cut list optimizer vs. true-shape nesting software

A cabinet parts list and a set of irregular CAD contours need different tools. Our focus is rectangular sheet planning connected to a cabinetmaking and quoting workflow, not a claim to replace every nesting or machine-programming system.

Workflow comparison based on public feature descriptions, not a performance benchmark.
Decision pointCNC Cut to SizeoptiCutterNest&Cut
Primary workflowRectangular cabinet and millwork panel planning, with customer-linked quote handoff.Rectangular sheet, panel and roll cutting calculations.CAD-based 2D nesting with contour preparation and CAM-related options.
Starting inputsManual parts or box dimensions; CSV/XML cut-list data.Manual panels; CSV and Excel imports advertised.DXF/DWG geometry imports and STEP unfolding advertised.
Cutting allowanceFixed 15.875 mm (5/8-inch) layout spacing.Adjustable kerf / blade thickness and edge-trim fields shown.Check current spacing and machine requirements with the vendor.

Sources reviewed October 25, 2026: optiCutter's public optimizer page and Nest&Cut's feature page. Vendor features can change. No comparative yield, speed or price advantage is claimed.

A good fit for our optimizer

Your job is mostly rectangular panels, the fixed spacing suits your process, and you want saved plans, workshop exports and a customer-linked quoting path.

When to choose another workflow

You need adjustable saw kerf, guaranteed guillotine cutting sequences, irregular contour nesting, STEP unfolding or ready-to-run machine code. Confirm those requirements before selecting software.

Optimizer subscription

Cut Optimizer · $45 USD / month

Request trial access through our existing onboarding process. Full access requires activation; account registration alone does not unlock the optimizer. Quote-upload access remains available separately.

Cut list optimizer questions

How do I calculate how many plywood sheets I need?

Multiply each part length by its width and quantity, then add the areas. Divide by the usable sheet area for an area-only lower bound. Actual sheet count also depends on part dimensions, layout spacing, grain and available stock. Inspect the generated placement and any unplaced parts before buying material.

Can I plan cuts on a 4 × 8-foot sheet?

Yes. Enter a sheet as 48 × 96 inches, or 1219.2 × 2438.4 mm, when those are its actual usable dimensions. Check the real stock size and any trimming allowance. Do not treat a nominal sheet size as guaranteed usable cutting area.

Is this a free cut list optimizer?

Full optimizer access is subscription-based or provided through approved access. You can request trial access through onboarding; account registration alone is not an unlocked free plan. Current monthly USD pricing is displayed on this page when available.

Can I use this as a panel saw cutting optimizer?

Use it for rectangular layout planning only when its fixed 15.875 mm spacing fits your process. It does not promise a guillotine-compatible cutting sequence or an adjustable saw kerf. Check cutting order, equipment limitations and safe workholding separately before production.

Does a DXF export include CNC toolpaths?

No. A rectangular DXF export contains layout geometry. Prepare tooling, feeds, depths, workholding, cutting order and machine-specific post-processing in your CAD/CAM workflow before operating a CNC router.

What does a cut list optimizer do?

It arranges rectangular parts on stock sheets and reports sheet use, waste and material cost. It helps cabinetmakers, woodworkers and fabricators plan a job before cutting or requesting a quote.

Which input and export formats are supported?

Enter parts or boxes manually, or import CSV and XML cut-list data. The workspace also offers document extraction for supported spreadsheets and PDFs; review extracted dimensions before optimizing. Export results as PDF, CSV, spreadsheet-compatible XLS or rectangular DXF layouts.

Is this true-shape nesting or a complete CAM system?

No. The current optimizer plans rectangular panels. It does not import and heal arbitrary DXF/DWG contours, unfold STEP models, nest parts inside holes or generate validated machine-specific NC toolpaths. DXF exports are layout geometry, not ready-to-run machine programs.

Can I change the cutting kerf or spacing?

The current workflow uses fixed spacing of 15.875 mm (5/8 inch). It is not currently an adjustable saw-kerf optimizer. Confirm that this allowance matches your production process before using a plan.

Does it support plywood, MDF and melamine?

Yes, rectangular sheet goods can be represented by their dimensions, thickness, available quantity and cost. Specify grain direction and edge banding where needed. Material machining suitability still needs shop review.

How do optimizer subscriptions and trial access work?

The current optimizer plan and monthly USD price are shown in the pricing section. Request trial access through the existing subscription flow and complete onboarding. Full optimizer access requires an active subscription or approved access; signing up alone does not unlock the optimizer.

Can I save results and create a quote?

Save a named draft for later reuse and export the result. When working inside a customer-linked quote workspace, use the existing create-quote action to carry the cut list and calculated result into the quote.

Is it suitable for shops in the United States and Canada?

The browser-based workflow supports inches and millimeters for North American cabinet shops, CNC routing businesses and commercial millwork teams. Use your own stock sizes and material costs rather than assuming standard dimensions or a guaranteed yield.

See It in Action

Schedule a personalized demo and see how this tool can transform your workflow.

Frequently Asked Questions

What is an online cut list optimizer?

An online cut list optimizer is a software tool that calculates the most efficient way to cut pieces from standard sheet materials like plywood, MDF, or melamine, minimizing offcut waste.

Can I export plans from the cut list optimizer?

Yes, our optimizer allows you to export your final cut layouts into professional PDF or DXF formats for use in your shop or with CNC machinery.

Does the optimizer account for saw blade thickness (kerf)?

Absolutely. You can define your specific saw blade kerf in the settings, ensuring that all cut dimensions and sheet usage calculations are accurate to real-world conditions.